Home Page
Standon Model TP Thrust Retention Plate
| The Standon model TP is for the retention of plain end and flexible joint assemblies. Ideal for use on expansion joints or any flanged system that needs restrained. |
 
|
| MATERIAL | ASTM A36 Mild Steel |
| Optional Material: | 100% 304 Stainless Steel |
| FABRICATION | Laser burnout or flame cut depending on material and thickness |
| FINISH | Standard: Black Optional:Galvanized or red oxide primer |
DIMENSIONS
| SIZE | PLATE THICKNESS | RECOMENDED PLATES PER FLANGE | RECOMENDED CONTROL ROD DIAMETER |
| 2" | ½" | 2 per side | 5/8" |
| 2½" | ½" | 2 per side | 5/8" |
| 3" | ½" | 2 per side | 5/8" |
| 4" | ½" | 2 per side | 5/8" |
| 6" | ½" | 2 per side | ¾" |
| 8" | ½" | 2 per side | ¾" |
| 10" | ¾" | 3 per side | 7/8" |
| 12" | ¾" | 3 per side | 7/8" |
| 14" | ¾" | 3 per side | 1" |
| 16" | ¾" | 4 per side | 1" |
| 18" | ¾" | 4 per side | 1" |
| 20" | 1" | 4 per side | 1 1/8" |
| 24" | 1" | 4 per side | 1 1/8" |